Share

Lasers etch a ‘perfect’ solar energy absorber

Using femto-second lasers to etch metallic structures, University of Rochester Institute of Optics professor Chunlei Guo and his team have developed a technique that can be used to collect sunlight to heat etched metal surfaces, which can then power an electrical generator for solar power. Credit: J. Adam Fenster/University of Rochester The University of Rochester…

Lasers etch a 'perfect' solar energy absorber
Using femto-second lasers to etch metallic structures, University of Rochester Institute of Optics professor Chunlei Guo and his team have developed a technique that can be used to collect sunlight to heat etched metal surfaces, which can then power an electrical generator for solar power. Credit: J. Adam Fenster/University of Rochester

The University of Rochester research lab that recently used lasers to create unsinkable metallic structures has now demonstrated how the same technology could be used to create highly efficient solar power generators.

In a paper in Light: Science & Applications, the lab of Chunlei Guo, professor of optics also affiliated with Physics and the Material Sciences Program, describes using powerful femto-second pulses to etch with nanoscale structures that selectively absorb light only at the solar wavelengths, but not elsewhere.

A regular surface is shiny and highly reflective. Years ago, the Guo lab developed a black metal technology that turned shiny metals pitch black. “But to make a perfect solar absorber,” Guo says, “We need more than a black metal and the result is this selective absorber.”

This surface not only enhances the from sunlight, but also reduces heat dissipation at other wavelengths, in effect, “making a perfect metallic solar absorber for the first time,” Guo says. “We also demonstrate solar energy harnessing with a thermal electric generator device.”

“This will be useful for any thermal solar energy absorber or harvesting device,” particularly in places with abundant sunlight, he adds.

The work was funded by the Bill and Melinda Gates Foundation, the Army Research Office, and the National Science Foundation.

The researchers experimented with aluminum, copper, steel, and tungsten, and found that tungsten, commonly used as a thermal solar absorber, had the highest solar absorption efficiency when treated with the new nanoscale structures. This improved the efficiency of thermal electrical generation by 130 percent compared to untreated tungsten.

Co-authors include Sohail Jalil, Bo Lai, Mohamed Elkabbash, Jihua Zhang, Erik M. Garcell, and Subhash Singh of the Guo lab.

The lab has also used the femto-second laser etching technology to create superhydrophobic (water repellent) and superhydrophilic (water-attracting) metals. In November 2019, for example, Guo’s lab reported creating metallic structures that do not sink no matter how often they are forced into water or how much it is damaged or punctured.

This new paper, however, expands upon the lab’s initial work with femto-second laser etched black metal.

Prior to creating the water attracting and repellent metals, Guo and his assistant, Anatoliy Vorobyev, demonstrated the use of femto-second laser pulses to turn almost any metal pitch black. The surface structures created on the metal were incredibly effective at capturing incoming radiation, such as light. But they captured light over a broad range of wavelengths.

Subsequently, his team used a similar process to change the color of a range of metals to various colors, such as blue, golden, and gray, in addition to the black already achieved. The applications could include making color filters and optical spectral devices, a car factory using a single laser to produce cars of different colors; etching a full-color photograph of a family into the refrigerator door; or proposing with a gold engagement ring that matches the color of your fiancee’s blue eyes.

The lab also used the initial black and colored metal technique to create a unique array of nano- and micro-scale structures on the surface of a regular tungsten filament, enabling a to glow more brightly at the same energy usage.

“We fired the laser beam right through the glass of the bulb and altered a patch on the filament. When we lit the bulb, we could actually see this one patch was clearly brighter than the rest of the filament,” Guo said.



More information:
Sohail A. Jalil et al, Spectral absorption control of femtosecond laser-treated metals and application in solar-thermal devices, Light: Science & Applications (2020). DOI: 10.1038/s41377-020-0242-y

Citation:
Lasers etch a ‘perfect’ solar energy absorber (2020, February 4)
retrieved 4 February 2020
from https://phys.org/news/2020-02-lasers-etch-solar-energy-absorber.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.

Read More